DESCRIPTION
Britone Anti-rust is an Alkyd based anti-corrosive primer suitable for
use on ferrous and non-ferrous metals and aluminum alloys. .It is the
perfect base for Britone High Gloss Enamel as final finish coat. Using
Britone Anti-rust can significantly increase the life of your items by
making them much more resistant to rust.
PROPERTIES
- Excellent durability
- Superior covering power
- Dries quickly
SURFACE PREPARATION
Remove loose rust with wire brush or rub down with coarse abrasive
paper to provide a firm surface. Surface must be clean and dry before
application. Remove grease, oil, etc. using general purpose thinner
and thoroughly allow to dry.
APPLICATION
Roller, Brush, Air spray
DRY TIME
Dust dry: 30 minutes
Touch Dry: Approx 1 hour
Re-coat: After 12 hours
COVERAGE
2
8-10 m /liter at 40/50 micron thickness per coat.
THINNING
Preferably White Spirit (General purpose thinner can also be used)
5-25% depending on the method of application and the type of
support.