Britone Undercoat provides an ideal base coat for preparing surfaces and obtaining a smooth final finish. It levels surfaces and blocks underlying colors. It is an Alkyd solvent-base products and the perfect partner for a finish with Britone High Gloss Enamel.
Britone undercoat is ideal for wood or plywood ceiling and can be also used as base for water paint finish.
ASPECT
White matt
WHERE TO USE
Wood, Metal, Masonry. Drywall, Plaster, etc.
SURFACE PREPARATION
Surface must be clean and dry before application. Remove grease, oil, etc. using general purpose thinner and thoroughly allow to dry.
COVERAGE
2 8-10 m /liter at 40/50 micron thickness per coat.
APPLICATION
Roller/Brush
DRY TIME
- Dust dry: 2-3 hours
- Touch Dry: Approximately 5 hours
- Re-coat: After 12 hours
THINNING
Preferably White Spirit (General purpose thinner can also be used) 5-25% depending on the method of application and the porosity and absorption capacity of the support.